Author Topic: Typos?  (Read 2424 times)

Luyu CEN

  • Jr. Member
  • **
  • Posts: 12
  • Karma: 0
    • View Profile
Typos?
« on: November 23, 2016, 01:36:19 PM »
http://www.math.toronto.edu/courses/apm346h1/20169/PDE-textbook/Chapter9/S9.1.html#mjx-eqn-eq-9.1.8
The coefficient should be $\frac{1}{4\pi c^2 t}$ instead of $\frac{1}{4\pi c t}$

http://www.math.toronto.edu/courses/apm346h1/20169/PDE-textbook/Chapter9/S9.1.html#mjx-eqn-eq-9.1.18
$v^\pm_\omega$ should be$-\frac{1}{4\pi}\iiint |x-y|^{-1}e^{\mp i\omega c^{-1}|x-y|}f(y)\, dy $ instead of
$v^\pm_\omega= -\frac{1}{4\pi}\iiint |x-y|^{-1}e^{\mp i\omega c^{-1}|x-y|}\, dy.$

http://www.math.toronto.edu/courses/apm346h1/20169/PDE-textbook/Chapter9/S9.2.html#mjx-eqn-eq-9.2.3
This one I am not sure but I think the coefficient $\frac{1}{2}$ is missing if we follow equation (2)
Otherwise we could not use the quadratic form in (4) which leads to theorem 1 in this section.
Therefore, it should be
\begin{equation}
\iint_{\Sigma} \Bigl(
\frac{1}{2}\bigl(u_{t}^2+|\nabla u|^2\bigr)\nu_t -c^2 u_t \nabla u \cdot \nu_x\Bigr) \,d\sigma=0
\end{equation}
instead of
\begin{equation}
\iint_{\Sigma} \Bigl(
\bigl(u_{t}^2+|\nabla u|^2\bigr)\nu_t -c^2 u_t \nabla u \cdot \nu_x\Bigr) \,d\sigma=0
\end{equation}
And the equation after (5) http://www.math.toronto.edu/courses/apm346h1/20169/PDE-textbook/Chapter9/S9.2.html#mjx-eqn-eq-9.2.5 also needs to be changed.

« Last Edit: November 23, 2016, 03:13:47 PM by Luyu CEN »