Author Topic: 9.3 problem 18  (Read 9066 times)

Brian Bi

  • Moderator
  • Full Member
  • *****
  • Posts: 31
  • Karma: 13
    • View Profile
9.3 problem 18
« on: March 25, 2013, 12:32:43 AM »
I'm having some trouble getting this problem to work out. There are four critical points: (0,0), (2, 1), (-2, 1), and (-2, -4). At the critical point (-2, -4), the Jacobian is \begin{pmatrix} 10 & -5 \\ 6 & 0 \end{pmatrix} with eigenvalues $5 \pm i\sqrt{5}$. Therefore it looks like it should be an unstable spiral point. However, when I plotted it, it looked like a node. Has anyone else done this problem?

http://www.math.psu.edu/melvin/phase/newphase.html
« Last Edit: March 25, 2013, 12:46:22 AM by Brian Bi »

Victor Ivrii

  • Administrator
  • Elder Member
  • *****
  • Posts: 2607
  • Karma: 0
    • View Profile
    • Personal website of Victor Ivrii
Re: 9.3 problem 18
« Reply #1 on: March 25, 2013, 06:57:38 AM »
I'm having some trouble getting this problem to work out. There are four critical points: (0,0), (2, 1), (-2, 1), and (-2, -4). At the critical point (-2, -4), the Jacobian is \begin{pmatrix} 10 & -5 \\ 6 & 0 \end{pmatrix} with eigenvalues $5 \pm i\sqrt{5}$. Therefore it looks like it should be an unstable spiral point. However, when I plotted it, it looked like a node. Has anyone else done this problem?

http://www.math.psu.edu/melvin/phase/newphase.html

Explanation:

http://weyl.math.toronto.edu/MAT244-2011S-forum/index.php?topic=48.msg159#msg159

Brian Bi

  • Moderator
  • Full Member
  • *****
  • Posts: 31
  • Karma: 13
    • View Profile
Re: 9.3 problem 18
« Reply #2 on: March 25, 2013, 01:28:57 PM »
So it is a spiral point but I didn't zoom in closely enough?

Victor Ivrii

  • Administrator
  • Elder Member
  • *****
  • Posts: 2607
  • Karma: 0
    • View Profile
    • Personal website of Victor Ivrii
Re: 9.3 problem 18
« Reply #3 on: March 25, 2013, 01:52:09 PM »
So it is a spiral point but I didn't zoom in closely enough?

No, the standard spiral remains the same under any zoom. However  your spiral rotates rather slowly in comparison with moving away and as it makes one rotation ($\theta$ increases by $2\pi$) the exponent increases by $5 \times 2\pi/\sqrt{5}\approx 14$ and the radius increases $e^{14}\approx 1.2 \cdot 10^6$ times. If the initial distance was 1 mm, then after one rotation it becomes 1.2 km.

Try plotting $x'=a x- y$, $y'=x+ ay$ for $a=.001,  .1,  .5, 1,  1.5,   2$  to observe that at for some $a$ you just cannot observe rotation.
« Last Edit: March 25, 2013, 02:01:38 PM by Victor Ivrii »